Atop-technology GW51C-MAXI-WDT User manual Manuel d'utilisateur télécharger pdf (Page 52)

User manual Version 1.4

GW51C-MAXI Serial Server

51 / 68

Appendix C. Hardware Configuration

C.1 Disable System Firmware

The AP (application program) firmware of GW51C-MAXI Serial Server can be disabled. This function is

used in the situation that one downloaded a wrong version of firmware that caused the system crashed.

To disable the current version of firmware and prevent it from executing, please do the followings:

1. Turn the power off, open GW51C-MAXI Serial Server case.

2. Short pin1 and pin2 of jumper JP1 on the right-top corner from the main board to disable AP firmware.

3. Power on GW51C-MAXI Serial Server.

4. Download the correct AP firmware to GW51C-MAXI Serial Server.

5. Remove the pin 1 and pin2 of jumper JP1 to enable AP firmware.

6. Close the case and continue ones operations.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Pas de commentaire

Atop-technology GW51C-MAXI-WDT User manual Manuel d'utilisateur Page 52