Atop-technology GW51C-MAXI-WDT User manual Manuel d'utilisateur télécharger pdf (Page 24)

User manual Version 1.4

GW51C-MAXI Serial Server

23 / 68

4.3 Configure by Hyper Terminal console utility

1. Power off GW51C-MAXI Serial Server.

2. Set the MODE switch SW1 to ‘OFF’ and SW2 to ‘ON’.

3. Use a PC to connect to GW51C-MAXI Serial Server’s console with RS-232 cross over cable.

4. Power on GW51C-MAXI Serial Server.

5. Open a Hyper Terminal program from ones computer Start menu -> Programs -> Accessories ->

Communication -> Hyper Terminal, set COM2 parameters as follows.

- Baud rate: 9600 bps

- Data bit: 8 bits

- Parity: None

- Stop bit: 1bit

- Flow control: None

Note:

At present time baud rate is fixed at 9600, 8, n, 1, without flow control for console port

communication, RS-232C parameters of ones computer COM port and GW51C-MAXI Serial Server

must be the same.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Pas de commentaire

Atop-technology GW51C-MAXI-WDT User manual Manuel d'utilisateur Page 24