Atop-technology EH7510 User manual Manuel d'utilisateur télécharger pdf (Page 75)

Atop Industrial Managed Ethernet Switch

EH7510

User Manual V 1.0

ERPS settings are shown on Fig. 2.57; users should disable the DIP Switch Control first in

order to set up ERPS parameters.

Table 2.44

Label

Description

Factory Default

ERPS

Choose whether to enable ERPS or not.

Disabled

Log

Choose to enable log.

Enabled

UERPS

Choose whether to enable UERPS.

When UERPS is enabled, ring ports periodically

sent a “heartbeat” packet to peer ring ports in order

to determine whether the link path (etc. wireless

bridge) is failure or alive.

If peer ring port cannot receive “heartbeat”

packets over 3 packets, the ring port will enter

protection state.

Note: This function affect the recovery time to

more than 20 ms.

Disabled

Heartbeat Interval

Set the Heartbeat Interval.

Range from 50 to 10000 milliseconds.

500 ms

RAPS VLAN

Create the ring by specifying the R-APS VLAN ID of

the ring.

VLAN ID ranges from 1 to 4094.

None

After enabling the ERPS and adding a RAPS VLAN, users can click on for

more details and configurations, which are shown on Fig. 2.58.

Fig. 2.58

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 119 120

Pas de commentaire

Atop-technology EH7510 User manual Manuel d'utilisateur Page 75