Atop-technology SE5001A User manual Manuel d'utilisateur télécharger pdf (Page 17)

User Manual Version 1.0

SE5001A Serial Device Server

3.1 Configuration by Serial Manager

SE5001A could be configured by Serial Manager, for more information, refer to Serial Manager’s manual.

3.2 Configuration by Telnet Utility

You can use a Telnet utility to change configuration settings of SE5001A by following steps：

3.2.1. Login to the System

->Open MS-DOS command prompt window or any other telnet application

->Telnet to SE5001A using command “telnet IP_address”. (For example：”telnet 10.0.50.100” in MS-DOS

command prompt window). After telnet into SE5001A, system will prompt for a password, the default password is

blank. (Figure 3.1)

Figure 3.1 Login to the system

Note: Press the default button of SE5001A to reset the password to the default value.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Pas de commentaire

Atop-technology SE5001A User manual Manuel d'utilisateur Page 17