Atop-technology SE5404D Quick Start Manuel d'utilisateur télécharger pdf

SE5404D Series

4-Port Serial Device Server

Quick Start Guide

Version 1.4 March 2013

This document is intended to provide customers with

brief descriptions about the product and assist customers

to get started. For detailed information and operation of

the product, please refer to the product user’s manual in

the product CD or Atop website.

PN: 89900377G

1. PACKAGING

Check whether your package contains following items:

◎ SE5404D/ SE5404D-TB / SE5404D-Sis

◎ Quick Start Guide with Warranty Card

◎ Product CD

◎ 7-pin Terminal Block ( 2ESDVM-07P) x1

◎ Four 5-pin Terminal Block for COMs

(SE5404D-S5 / SE5404D-Sis only)

Optional Accessories：

◎ US Power Adapter 50500151120009G

◎ EU Power Adapter 50500151120019G

◎ Wall Mount Kit 202EH731000003G

◎ Grounding Cable 59906861G

◎ Conductive DIN-Rail Kit 201EH731000005G

◎ Console Cable 50891971G

◎ DB9 to TB5 Converter 59906231G

2. HARDWARE DESCRIPTION

NOTE:

1. SE5404D (RS-232/422/485 DB9 without isolation ),

2. SE5404-TB (RS-232/422/485 TB5 without isolation)

3. SE5404D-Sis (RS-422/485 TB5 with isolation)

4. Press the Default button of SE5404D to reset to the

default value

Figure 2.1. SE5404D Series interfaces

LED Indicators:

Name

Color

Status

Description

Power

Green

Off

Power is not connected

Power is connected

LAN

Green

Off

Ethernet Disconnected

Blinking

Data is transmitting on

Ethernet for 100Mbps

Orange

Blinking

Data is transmitting on

Ethernet for 10Mbps

COM

Green

Off

No data is transmitting on

COM port

Blinking

Data is transmitting on

COM port

RUN

Green

Off

System is not ready or

halt

Blinking

AP firmware is running

normally

Installation Procedures:

Step 1: Connect SE5404D to power source

Step 2: Connect SE5404D to the Ethernet network. Use a

standard straight-through or cross-over Ethernet

cable Always make sure the PC is on the same

network subnet as SE5404D.

Step 3: Connect SE5404D’s serial port to a serial device.

Step 4: Mount SE5404D to a Din Rail.

3 SOFTWARE SETUP

Default Settings

User Name: admin

Password: null (blank)

LAN1

LAN2

IP: 10.0.50.100

IP： 192.168.1.1

Mask: 255.255.0.0

Mask: 255.255.255.0

Gateway: 10.0.0.254

Gateway: 192.168.1.254

To Access and Configure SE5404D:

There are three ways to access SE5404D.

1. SerialManager Utility (included in the CD)

2. Web Browser

3. Telnet

Note that the PC and SE5404D should be in the same

subnet. If not, please your PC’s network settings or use

SerialManager to change the network settings of

SE5404D.

1 2

Résumé du contenu

Page 1 - Quick Start Guide

SE5404D Series 4-Port Serial Device Server Quick Start Guide Version 1.4 March 2013 This document is intended to provide customers with br

Page 2 - 3 PIN ASSIGNMENTS

3 PIN ASSIGNMENTS 9-Pin D-Sub (SE5404D): Pin RS-232 RS-422 RS-485 1 DCD N/A N/A 2 RXD TXD+ N/A 3 TXD RXD+ DATA+ 4 DTR N/A N/A 5 SG SG SG 6 DSR

Commentaires sur ces manuels

Pas de commentaire

Atop-technology SE5404D Quick Start Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel informatique Atop-technology SE5404D Quick Start. Atop Technology SE5404D Quick Start User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Atop-technology SE5404D Quick Start